A

Alao, Abdur-Rasheed (2016) Fabrication and characterization of lithium metasilicate/disilicate glass ceramics and yttria tetragonal zirconia polycrystals for dental restorations. PhD thesis, James Cook University.

Adam, C.J., and Loughran, J.G. (2007) Finite element prediction of the performance of sugarcane rolling mills. International Sugar Journal, 109 (1301). pp. 272-284.

Adam, C., and Loughran, J. (2005) The effect of blanket thickness on extraction energy in sugarcane rolling mills: a finite element investigation. Biosystems Engineering, 92 (2). pp. 255-263.

Adam, C.J., and Loughran, J.G. (2004) Multi-variate analysis of frictional interaction between grooved rollers and prepared sugarcane. Transactions of the ASABE, 47 (5). pp. 1611-1618.

Adam, Clayton J., and Loughran, Jeffrey G. (2004) Seepage induced consolidation in permeability measurement for fibro-porous media - a finite element investigation. Journal of Porous Media, 7 (2). pp. 101-117.

B

Bodisco, Timothy, Reeves, Robert, Situ, Rong, and Brown, Richard (2012) Bayesian models for the determination of resonant frequencies in a DI diesel engine. Mechanical Systems and Signal Processing, 26. pp. 305-314.

Barnes, Matthew Gavin (2008) Development of a single drum chopper concept for a sugarcane harvester. Masters (Research) thesis, James Cook University.

Britton, P.F., and Loughran, J.G. (2003) Measuring local bagasse deformation with a customised image measurement technique. In: Proceedings of the 25th Conference of the Australian Society of Sugar Cane Technologists. pp. 1-8. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Britton, P.F., and Loughran, J.G. (2002) Image tensor analysis: a numerical tool for data acquisition and constitutive analysis of historic continua. In: Proceedings of the 3rd Australasian Congress on Applied Mechanics. pp. 99-104. From: Australasian Congress on Applied Mechanics, 20-22 February 2002, Sydney, Australia.

D

Duan, M. (2005) Adaptive hybrid/mixed finite element analysis of singular problems. In: Proceedings of 4th Australian Congress on Applied Mechanics. pp. 95-100. From: 4th Australian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Duan, Mei, and Loughran, Jeffrey G. (2005) Application of a dewatering model for fibroporous media under constrained uniaxial compression. Journal of Porous Media, 8 (5). pp. 431-442.

Duan, M., and Loughran, J.G. (2005) Heuristic model for the permeability of a saturated fibro porous media with application to prepared sugar cane. In: Proceedings of 4th Australian Congress on Applied Mechanics. pp. 131-136. From: 4th Australian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Duan, M. (2004) An efficient hybrid/mixed element for geometrically non linear analysis of plate and shell structures. Computational Mechanics, 35 (1). pp. 72-84.

Duan, M. (2004) Non linear analyses of Rhombic Plates subjected to a concentrated load. In: Proceedings of 21st International Congrees of Theoretical and Applied Mechanics. From: 21st International Congrees of Theoretical and Applied Mechanics, 15-21 August 2004, Warsaw, Poland.

Duan, Mei, and Loughran, Jeffrey G. (2004) A constitutive modelling analysis for deformation of prepared sugar cane. Key Engineering Materials, 274-276. pp. 271-276.

Downing, C.M., and McBain, G.D. (2000) Towards understanding the pressure dependence of hygroscopic water. In: Proceedings of the 22nd Annual Conference of the Australian Society of Sugar Cane Technologists (22) pp. 361-367. From: ASSCT 2000: 22nd Annual Conference of the Australian Society of Sugar Cane Technologists, 2-5 May 2000, Bundaberg, QLD, Australia.

E

Ebersbach, Stephan, Peng, Zhongxiao, and Kessissoglou, Nicole (2007) Smart condition monitoring by intergration of vibration, oil and wear particle analysis. In: Proceedings of the 14th International Congress on Sound and Vibration 2007. pp. 1-9. From: 14th International Congress on Sound and Vibration, 9-12 July 2007, Cairns, Qld, Australia.

Ebersbach, Stephan, and Peng, Zhongxiao (2007) Wear oriented strategy for gearbox remaining lifetime estimation. In: Proceedings of the 14th International Congress on Sound and Vibration 2007. pp. 1-8. From: 14th International Congress on Sound and Vibration, 9-12 July 2007, Cairns, Qld, Australia.

Ebersbach, Stephan, and Peng, Zhongxiao (2005) The development of a comprehensive machine condition monitoring program. In: Proceedings of Fourth DSTO International Conference on Health and Usage Monitoring. pp. 1-11. From: AIAC-11 Eleventh Australian International Aerospace Congress, 13 - 17 March 2005, Melbourne, VIC, Australia.

F

Feng, Y., Han, K., Owen, D.R.J., and Loughran, J. (2007) Upscaling of discrete element models for particle systems. In: Proceedings of Discrete Element Methods 2007. pp. 1-9. From: Discrete Element Methods (DEM) 2007, 27-29 AUG 2007, Brisbane, QLD, Australia.

G

Gross, K.A., Yan, F.Y., Berndt, C., and Simon, G.P. (2005) Repair of multi-layered, polymer-based thermal spray coatings. In: Proceedings of International Thermal Spray Conference & Exposition. From: International Thermal Spray Conference & Exposition, 2-4 May 2005, Basel, Switzerland.

H

Holmes, D.W., and Loughran, J.G. (2007) A theory for the isolation of the complex deformation characteristics of nonlinear viscoelastic materials. ANZIAM Journal, 48. pp. 645-660.

I

Ichim, I., Li, Q., Loughran, J., Swain, M.V., and Kieser, J. (2007) Restoration of non-carious cervical lesions: part I. modelling of restorative fracture. Dental Materials, 23 (12). pp. 1553-1561.

K

Keir, John, Kessissoglou, Nicole J., and Norwood, Chris J. (2005) Active control of connected plates using single and multiple actuators and error sensors. Journal of Sound and Vibration, 281 (1-2). pp. 73-97.

Keir, John, Kessissoglou, Nicole J., and Norwood, Chris J. (2004) An analytical investigation of single actuator and error sensor control in connected plates. Journal of Sound and Vibration, 271 (3-5). pp. 635-649.

Kessissoglou, Nicole J. (2004) Power transmission in L-shaped plates including flexural and in-plane vibration. Journal of the Acoustical Society of America, 115 (3). pp. 1157-1169.

Kessissoglou, Nicole J., and Keir, John (2004) A hybrid approach to predict the vibration transmission in ship structures using a waveguide method and statistical energy analysis. In: Proceedings of 2004 Annual Conference of the Australian Acoustical Society. pp. 587-592. From: 2004 Annual Conference of the Australian Acoustical Society, 3-5 November 2004, Gold Coast, QLD, Australia.

Kessissoglou, Nicole, Tso, Yan, and Norwood, Chris (2003) Active control of a fluid-loaded cylindrical shell - part 2: active modal control. In: Proceedings of the 8th Western Pacific Acoustics Conference (Wespac VIII). pp. 1-4. From: Wespac VIII - Acoustics on the Move, 7-9 April 2003, Melbourne, VIC, Australia.

Kauppila, D.J., Britton, P.F., Kent, G., and Loughran, J.G. (2003) Grooving and its effect on bagasse moisture content. In: Proceedings of the 25th Conference of the Australian Society of Sugar Cane Technologists. pp. 1-8. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Kauppila, D.J., Kent, G., and Loughran, J.G. (2003) Preliminary experimental studies into the flow of juice in roller groove conduits. In: Proceedings of the 25th Conference of the Australian Society of Sugar Cane Technologists (2003) pp. 1-9. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Kessissoglou, Nicole J., Ragnarsson, Patrick, and Löfgren, Anders (2003) An analytical and experimental comparison of optimal actuator and error sensor location for vibration attenuation. Journal of Sound and Vibration, 260 (4). pp. 671-691.

Kauppila, D.J., and Barnes, G. (2003) An experimental study into the extraction performance of sieved portions of prepared cane. In: Proceedings of the 25th Conference of the Australian Society of Sugar Cane Technologists. pp. 1-9. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Kessissoglou, N.J. (2002) Effects of in-plane modes on the power flow characteristics in ship structures. In: Proceedings of Annual Conference of the Australian Acoustical Society. pp. 433-442. From: Innovation in Acoustics and Vibration, 13-15 November 2002, Adelaide, Australia.

Kessissoglou, N.J. (2001) An analytical and experimental investigation on active control of the flexural wave transmission in a simply supported ribbed plate. Journal of Sound and Vibration, 240 (1). pp. 73-85.

Kessissoglou, Nicole J. (2001) Active attenuation of the wave transmission through an L-plate junction. Journal of the Acoustical Society of America, 110 (1). pp. 267-277.

Kauppila, D.J., Loughran, J.G., and Kent, G.A. (2001) Fundamental studies into the dewatering of prepared cane and bagasse between grooved surfaces. Proceedings of the Australian Society of Sugar Cane Technologists, 23. pp. 437-443.

Kauppila, D.J., Loughran, J.G., and Kent, G.A. (2001) Mechanisms governing the packing of bagasse into grooves during uniaxial compression. Proceedings of the Australian Society of Sugar Cane Technologists, 23. pp. 421-427.

Kessissoglou, Nicole J. (2000) Active control of the plate energy transmission in a semi-infinite ribbed plate. The Journal of the Acoustical Society of America, 107 (1). pp. 324-331.

Kessissoglou, Nicole J., and Pan, Jie (2000) The effect of structural coincidences on the acoustic fields radiated from a ribbed plate under light fluid-loading. International Journal of Acoustics and Vibration, 5 (1). pp. 15-22.

Kauppila, D.J., and Loughran, J.G. (2000) An experimental investigation into the effect of mill orientation angle on reabsorption factor. In: Proceedings of the 22nd Annual Conference of the Australian Society of Sugar Cane Technologists (22) pp. 423-428. From: ASSCT 2000: 22nd Annual Conference of the Australian Society of Sugar Cane Technologists, 2-5 May 2000, Bundaberg, QLD, Australia.

L

Lei, Chengwang, Peng, Zhongxiao, Day, Thomas, Yan, Xinping, Bai, Xiuqin, and Yuan, Chengqing (2011) Experimental observation of surface morphology effect on crystallization fouling in plate heat exchangers. International Communications in Heat and Mass Transfer, 38 (1). pp. 25-30.

Loughran, J.L., and Britton, P.F. (2007) Modelling of coal flow through industrial scale transfer chutes. In: Proceedings of the Discrete Element Methods Conference 2007 (21) From: Discrete Element Methods (DEM) 2007, 27-29 August 2007, Brisbane, QLD, Australia.

Loughran, J.G., and Kannapiran, Arasu (2005) Three-dimensional simulation of the rolling of a saturated fibro-porous media. Finite Elements in Analysis and Design, 42 (1). pp. 90-104.

Loughran, J.G., and Leonardi, C. (2005) Application of discrete element methods to modelling of belt feeders. In: Proceedings of the Fourth Australasian Congress on Applied Mechanics. pp. 119-124. From: Fourth Australasian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Loughran, J.G., and Anderson, S.I. (2005) Simulation and modeling of the penetration of brittle-ductile assemblies under large deformation. In: Proceedings of the 1st International Conference in Engineering in Materials 2004. From: 1st International Conference in Engineering in Materials 2004, 12-14 July 2004, Townsville, QLD, Australia.

Liovic, Peter, Rudman, Murray, and Liow, Jong-Leng (2002) Numerical modelling of free surface flows in metallurgical vessels. Applied Mathematical Modelling, 26 (2). pp. 113-140.

Loughran, J.G., and Anderson, S.I. (2002) DEM - A virtual laboratory for studying complex particulate flow problems. In: Proceedings of the 3rd Australasian Congress on Applied Mechanics. From: Australasian Congress on Applied Mechanics, 20-22 February 2002, Sydney, Australia.

Loughran, J.G., and Kannapiran, A. (2002) Finite element modelling of the crushing of prepared cane and bagasse. In: Proceedings of the 24th Conference of the Australian Society of Sugar Cane Technologists (24) From: 2002 Conference of the Australian Society of Sugar Cane Technologists, 29 April - 2 May 2002, Cairns, QLD, Australia.

Liow, Jong-leng (2002) Sloshing of melts in a bath smelting process having a elliptic cross section. Iron and Steel Institute of Japan International, 42 (7). pp. 694-701.

Liovic, P., Rudman, M., and Liow, J-L. (2002) A volume-tracking method for the modelling of multi-fluid flows in engineering unit operations. In: Proceedings of the 6th World Congress of Chemical Engineering. From: 6th World Congress of Chemical Engineering, 23-27 September 2001, Melbourne, VIC, Australia.

M

Montavon, G., Berndt, C., Trifa, F.I., and Guessasma, S. (2005) Correlating the spray pattern to the coating architecture: exploring the dominant mechanisms and process parameters. In: Proceedings of International Thermal Spray Conference & Exposition. From: International Thermal Spray Conference & Exposition, 2-4 May 2005, Basel, Switzerland.

Michlik, P., Berndt, C., and Racek, O. (2005) XFEM modeling of effective thermal properties and fracture of thermal barrier coatings. In: Proceedings of International Thermal Spray Conference & Exposition. From: International Thermal Spray Conference & Exposition, 2-4 May 2005, Basel, Switzerland.

McBain, G.D. (2001) Convection in a horizontally heated sphere. Journal of Fluid Mechanics, 438. pp. 1-10.

McBain, G.D., Suehrcke, H., and Harris, J.A. (2000) Evaporation from an open cylinder. International Journal of Heat and Mass Transfer, 43 (12). pp. 2117-2128.

P

Peng, Zhongxiao, Wang, Meiling, and Yin, Ling (2012) Investigation of nano-mechanical properties of cartilages of sheep knee joints. In: Proceedings of the 7th Australasian Congress on Applied Mechanics. pp. 315-321. From: 7th Australasian Congress on Applied Mechanics, 9-12 December 2012, University of Adelaide, SA.

Peng, Z., and Brown, J. (2005) The development of a quantitative method for the assessment of abrasive and corrosive wear. In: Proceedings of Fourth DSTO International Conference on Health and Usage Monitoring. pp. 1-11. From: AIAC-11 Eleventh Australian International Aerospace Congress, 13 - 17 March 2005, Melbourne, VIC, Australia.

Peng, Z., Kessissoglou, N.J., and Cox, M. (2005) A study of the effect of contaminant particles in lubricants using wear debris and vibration condition monitoring techniques. Wear, 258 (11-12). pp. 1651-1662.

Peng, Z., and Kessissoglou, N. (2003) Integration of wear debris and vibration analysis for machine condition monitoring. In: Proceedings of International Conference on Intelligent Maintenance Systems. pp. 23-30. From: International Conference on Intelligent Maintenance Systems IMS2003, 30 October - 1 November 2003, Xi'an, China.

Peng, Z., and Thetford, A. (2003) The development of an expert system to monitor the condition of gearboxes using wear debris analysis techniques. In: Proceedings of International Conference on Intelligent Maintenance Systems. pp. 182-189. From: International Conference on Intelligent Maintenance Systems IMS2003, 30 October - 1 November 2003, Xi'an, China.

Peng, Z., and Kessissoglou, N. (2003) An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis. Wear, 255 (7-12). pp. 1221-1232.

Peng, Z., and Kessissoglou, N.J. (2002) The correlation of wear debris analysis with vibrations analysis of a worm gear. In: Proceedings of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance (ACSIM 2002). pp. 255-261. From: Systems Integrity and Maintenance, 25-27 September 2002, Cairns, QLD, Australia.

Peng, Zhongxiao (2002) An integrated intelligence system for wear debris analysis. Wear, 252 (9-10). pp. 730-743.

Peng, Z., and Tomovich, S.J. (2002) The study of wear particles generated from industrial machines. In: Proceedings of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance (ACSIM 2002). pp. 423-428. From: Systems Integrity and Maintenance, 25-27 September 2002, Cairns, QLD, Australia.

Peng, Z., and Goodwin, S. (2001) Wear-debris analysis in expert systems. Tribology Letters, 11 (3-4). pp. 177-184.

R

Racek, O., Berndt, C.C., Guru, D., and Heberlein, J. (2005) Microstructural observation of the sintering behavior of nanostructured yttria stabilized zirconia. In: Proceedings of International Thermal Spray Conference & Exposition. From: International Thermal Spray Conference & Exposition, 2-4 May 2005, Basel, Switzerland.

S

Situ, Rong, Brown, Richard J., and Loberto, Anthony (2010) Experimental study of the concentration field of discharge from a boat propeller. Environmental Fluid Mechanics, 10 (6). pp. 657-675.

Suehrcke, H., Däldehög, D., Harris, J.A., and Lowe, R.W. (2004) Heat transfer across corrugated sheets and honeycomb transparent insulation. Solar Energy, 76. pp. 351-358.

Suehrcke, Harry, Lowe, Rodney W., and Harris, Jonathan A. (2000) Effect of wall emissivity on the coupled radiative and conductive heat transfer across honeycomb transparent insulation. In: Proceedings of the 7th Heath and Mass Transfer Conference. pp. 301-307. From: 7th Australasian Heat and Mass Transfer Conference, 3-6 July 2000, Townsville, QLD, Australia.

Suehrcke, Harry (2000) On the relationship between duration of sunshine and solar radiation on the earth's surface: Ångström's equation revisited. Solar Energy, 68 (5). pp. 417-425.

T

Tian, Yuan (2012) Development of advanced techniques for osteoarthritis diagnosis and assessment. PhD thesis, James Cook University.

Tomovich, S.J., and Peng, Z. (2005) Optimised relfection imaging for surface roughness analysis using confocal laser scanning microscopy and height encoded image processing. Journal of Physics: conference series, 13. pp. 426-429.

Tso, Yan, Kessissoglou, Nicole, and Norwood, Chris (2003) Active control of a fluid-loaded cylindrical shell - part 1: dynamics of the physical system. In: Proceedings of the 8th Western Pacific Acoustics Conference (Wespac VIII). pp. 1-4. From: Wespac VIII - Acoustics on the Move, 7-9 April 2003, Melbourne, VIC, Australia.

W

Wheatley, Greg, and Chandrasiri, Rendage Sachini Sandeepa (2020) Design of an emergency conveyor belt clamp for heavy duty drift belt installation in underground applications: a case study. Iberoamerican Journal of Industrial Engineering, 12 (24). pp. 34-52.

Wheatley, Greg (2019) Analysis of catastrophically failed industrial bolt. Journal of Material Sciences & Engineering, 8 (1). 1000514.

Wheatley, Greg (2018) Design of a 10T Flake Pile Roller Stand. Industrial Engineering & Management, 7 (4). 1000275.

Wheatley, Greg (2018) Design of a conveyor belt turning frame. Industrial Engineering & Management, 7 (4). 1000274.

Wheatley, Greg (2018) Design of industrial lifting crate rated for 1 tonne load. Industrial Engineering & Management, 7 (4). 1000273.

Wheatley, Greg (2009) Measurement While Coring (MWC) - measurement of core acquisition in real time. APPEA Journal, 49 (1). pp. 25-30.

Wheatley, G., and Ohta, Akihito (2002) On fatigue life improvement using low transformation temperature weld material. In: Proceedings of the International Conference of Structural Inegrity and Fracture. pp. 201-205. From: SIF 2002: Structural Integrity and Fracture, 25-28 September 2002, Perth, WA, Australia.

Wheatley, G., Hu, X.Z., and Estrin, Y. (1999) Effects of a single tensile overload on fatigue crack growth in a 316L steel. Fatigue and Fracture of Engineering Materials and Structures, 22. pp. 1041-1051.

Wheatley, G., Bowman, D., Estrin, Y., Hu, X.Z., and Bréchet, Y. (1999) Interaction between low cycle fatigue and high cycle fatigue in common metallic materials. In: Proceedings of the Seventh International Fatigue Congress (2) pp. 1045-1050. From: Fatigue 99: Seventh International Fatigue Congress, 8-12 June 1999, Beijing, China.

Wheatley, G., Estrin, Y., Hu, X.Z., and Brechet, Y. (1998) Effect of low cycle fatigue on subsequent high cycle fatigue life of 316L stainless steel. Materials Science and Engineering A: Structural Materials: Properties Microstructure and Processing, 254. pp. 315-316.

Wheatley, G., Niefanger, R., Estrin, Y., and Hu, X.Z. (1998) Fatigue crack growth in 316L stainless steel. Key Engineering Materials, 145-149. pp. 631-636.

Wheatley, G., Estrin, Y., Hu, X.Z., and Brechet, Y. (1998) Interaction between low cycle fatugue and high cycle fatigue in 316L stainless steel. In: Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials. pp. 567-572. From: 4th International Conference on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, 7-11 September 1998, Garmisch-Partenkirchen, Germany.

Wheatley, G., Hu, X.Z., and Estrin, Y. (1997) Field emission scanning electron micrographs of fatigue crack growth in 316L steel following a single tensile overload. In: Proceedings of the 1997 Workshop and State Conference of the Australian X-ray Analytical Association (WA Branch) and the Western Australian Society of Electron Microscopy. pp. 13-18. From: 1997 Workshop and State Conference of the Western Australian X-ray Analytical Association and the Western Australian Society of Electron Microscopy, 1997, Perth, WA, Australia.

Y

Yuan, C.Q., Yan, X.P., and Peng, Z. (2007) Prediction of surface features of wear components based on surface characteristics of wear debris. Wear, 263 (7-12). pp. 1513-1517.

Yuan, Chengqing, Peng, Zhongxiao, and Yan, Xinping (2005) Surface characterization using wavelet theory and confocal laser scanning microscopy. Journal of Tribology, 127 (2). pp. 394-404.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The characterization of wear transitions in sliding wear process contaminated with silica and iron powder. Tribology International, 38 (2). pp. 129-143.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The study of sliding and rolling wear using wear debris analysis techniques. In: Proceedings of Modern Science of Advanced Materials MSAM 2004: 1st International Conference in Engineering of Materials. pp. 1-7. From: Modern Science and Advanced Materials: 1st International Conference in Engineering of Materials, 12-14 July 2004, Townsville, QLD, Australia.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2004) Effects of temperature on sliding wear process under contaminated lubricant test conditions. Wear, 257 (7-8). pp. 812-822.

Yuan, C.Q., Li, J., Yan, X.P., and Peng, Z. (2003) The use of the fractal description to characterize engineering surfaces and wear particles. Wear, 255 (1-6). pp. 315-326.

Z

Zhou, S.Q., Zhao, A.P., Chin, K.S., Yarlagadda, P.K.D.V., and Peng, Z. (2004) A solution for knowledge resources provider over the internet. International Journal of Advanced Manufacturing Technology, 24 (1). pp. 148-160.

Zheng, D.Y., and Kessissoglou, N.J. (2003) On the derivation of element stiffness matrix of a cracked beam-column element. In: Proceedings ofthe 5th Asia-Pacific Structural Engineering and Construction Conference APSEC 2003. pp. 253-259. From: The 5th Asia-Pacific Structural Engineering & Construction Conference (APSEC 2003), 26-28 Aug 2003, Johor, Malaysia.