Article

Yin, Shi, Tuladhar, Rabin, Collister, Tony, Combe, Mark, Sivakugan, Nagaratnam, and Deng, Zongcai (2015) Post-cracking performance of recycled polypropylene fibre in concrete. Construction and Building Materials, 101 (Part 1). pp. 1069-1077.

Yin, Shi, Tuladhar, Rabin, Shi, Feng, Shanks, Robert A., Combe, Mark, and Collister, Tony (2015) Mechanical reprocessing of polyolefin waste: a review. Polymer Engineering and Science, 55 (12). pp. 2899-2909.

Ahmad, Jakaria, Bazaka, Kateryna, Vasilev, Krasimir, and Jacob, Mohan V. (2015) Electrical conduction in plasma polymerized thin films of γ-terpinene. Journal of Applied Polymer Science, 132 (30). 42318.

Yin, Shi, Tuladhar, Rabin, Shanks, Robert A., Collister, Tony, Combe, Mark, Jacob, Mohan, Tian, Ming, and Sivakugan, Nagaratnam (2015) Fiber preparation and mechanical properties of recycled polypropylene for reinforcing concrete. Journal of Applied Polymer Science, 132 (16). 41866. pp. 1-10.

Grant, Daniel S., Bazaka, Kateryna, Siegele, Rainer, Holt, Stephen A., and Jacob, Mohan (2015) Ion irradiation as a tool for modifying the surface and optical properties of plasma polymerised thin films. Nuclear Instruments & Methods in Physics Research Section B, 360. pp. 54-59.

Karthikeyan, O.P., Karthigeyan, C.P., Cirés, Samuel, and Heimann, Kirsten (2015) Review of sustainable methane mitigation and bio-polymer production. Critical Reviews in Environmental Science and Technology, 45. pp. 1579-1610.

Ahmad, Jakaria, Bazaka, Kateryna, Whittle, Jason D., Michelmore, Andrew, and Jacob, Mohan V. (2015) Structural characterization of γ-terpinene thin films using mass spectroscopy and X-Ray photoelectron spectroscopy. Plasma Processes and Polymers, 12 (10). pp. 1085-1094.

Bazaka, Kateryna, Ketheesan, Natkunam, and Jacob, Mohan V. (2014) Polymer encapsulation of magnesium to control biodegradability and biocompatibility. Journal of Nanoscience and Nanotechnology, 14 (10). pp. 8087-8093.

Bhuyan, R.K., Kumar, T. Santhosh, Pamu, D., Renehan, J.M., and Jacob, M.V. (2014) Low temperature and broadband dielectric properties of V(2)O(5) doped Mg(2)TiO(4) ceramics. Materials Express, 4 (5). pp. 349-358.

Ahmad, Jakaria, Bazaka, Kateryna, and Jacob, Mohan V. (2014) Optical and surface characterization of radio frequency plasma polymerized 1-isopropyl-4-methyl-1,4-cyclohexadiene thin films. Electronics, 3 (2). pp. 266-281.

Jacob, Mohan V., Easton, Chris D., Anderson, Liam J., and Bazaka, Kateryna (2014) RF plasma polymerised thin films from natural resources. International Journal of Modern Physics: Conference Series, 32. 1460319. pp. 1-10.

Ahmad, Jakaria, Bazaka, Katia, Oelgemöller, Michael, and Jacob, Mohan V. (2014) Wetting, solubility and chemical characteristics of plasma-polymerized 1-isopropyl-4-methyl-1,4-cyclohexadiene thin films. Coatings, 4 (3). pp. 527-552.

Ahmad, Jakaria, Bazaka, Kateryna, Anderson, Liam J., White, Ronald D., and Jacob, Mohan V. (2013) Materials and methods for encapsulation of OPV: a review. Renewable and Sustainable Energy Reviews, 27. pp. 104-117.

Kazum, O., and Mathan, M. Bobby (2013) Galvanostatic polymerisation of aniline on steel: improving the coating performance in chloride-containing environment. Synthetic Metals, 180. pp. 54-58.

Taguchi, Dai, Manaka, Takaaki, Iwamoto, Mitsumasa, Bazaka, Kateryna, and Jacob, Mohan V. (2013) Analyzing hysteresis behavior of capacitance-voltage characteristics of IZO/C₆₀/pentacene/Au diodes with a hole-transport electron-blocking polyterpenol layer by electric-field-induced optical second-harmonic generation measurement. Chemical Physics Letters, 572. pp. 150-153.

Vucko, M.J., Poole , A.J., Sexton , B.A., Glenn, F.L., Carl, C., Whalan, S., and de Nys, R. (2013) Combining a photocatalyst with microtopography to develop effective antifouling materials. Biofouling, 29 (7). pp. 751-762.

Bazaka, Kateryna, and Jacob, Mohan V. (2012) Solubility and surface interactions of RF plasma polymerized polyterpenol thin films. Materials Express, 2 (4). pp. 285-293.

Bazaka, Kateryna, Jacob, Mohan V., Crawford, Russell J., and Ivanova, Elena P. (2012) Efficient surface modification of biomaterial to prevent biofilm formation and the attachment of microorganisms. Applied Microbiology and Biotechnology, 95 (2). pp. 299-311.

Bazaka, Kateryna, Jacob, Mohan V., Crawford, Russell J., and Ivanova, Elena P. (2011) Plasma assisted surface modification of organic biopolymers to prevent bacterial attachment. Acta Biomaterialia, 7 (5). pp. 2015-2028.

Bazaka, Kateryna, Jacob, Mohan V., and Bowden, Bruce F. (2011) Optical and chemical properties of polyterpenol thin films deposited via plasma-enhanced chemical vapor deposition. Journal of Materials Research, 26 (8). pp. 1018-1025.

Bazaka, Kateryna, Jacob, Mohan V., Truong, Vi Khanh, Crawford, Russell J., and Ivanova, Elena P. (2011) The effect of polyterpenol thin film surfaces on bacterial viability and adhesion. Polymers, 3 (1). pp. 388-404.

Kanta, A-F., Montavon, G., Berndt, C.C., Planche, M-P., and Coddet, C. (2011) Intelligent system for prediction and control: application in plasma spray process. Expert Systems with Applications, 38 (1). pp. 260-271.

Bazaka, Kateryna, Jacob, Mohan V., Taguchi, Dai, Manaka, Takaaki, and Iwamoto, Mitsumasa (2011) Effect of organic gate dielectric material properties on interfacial charging and discharging of pentacene MIM device. Physics Procedia, 14. pp. 62-66.

Bazaka, Kateryna, Jacob, Mohan V., Taguchi, Dai, Manaka, Takaaki, and Iwamoto, Mitsumasa (2011) Investigation of interfacial charging and discharging in double-layer pentacene-based metal-insulator-metal device with polyterpenol blocking layer using electric field induced second harmonic generation. Chemical Physics Letters, 503 (1-3). pp. 105-111.

Bazaka, Kateryna, and Jacob, Mohan V. (2011) Nanotribological and nanomechanical properties of plasma-polymerized polyterpenol thin films. Journal of Materials Research, 26 (23). pp. 2952-2961.

Bazaka, Kateryna, Jacob, Mohan V., Truong, Vi Khanh, Wang, Feng, Pushpamali, Wickrama Arachchilage Anoja, Wang, James Y., Ellis, Amanda V., Berndt, Christopher C., Crawford, Russell J., and Ivanova, Elena P. (2010) Plasma-enhanced synthesis of bioactive polymeric coatings from monoterpene alcohols: a combined experimental and theoretical study. Biomacromolecules, 11 (8). pp. 2016-2026.

Mathan, M. Bobby, Gomes, D., Dietzel, W., and Abetz, V. (2008) Polyoxadiazole-based coating for corrosion protection of magnesium alloy. Surface & Coatings Technology, 202 (19). pp. 4598-4601.

Holmes, D.W., and Loughran, J.G. (2008) Theoretical aspects of the testing of elasto-viscoelastic–viscoplastic materials. Polymer Testing, 27 (2). pp. 189-203.

Holmes, D.W., Loughran, J.G., and Suehrcke, H. (2006) Constitutive model for large strain deformation of semicrystalline polymers. Mechanics of Time Dependent Materials, 10 (4). pp. 281-313.

Watson, J.A., Brown, C.L., Myhra, S., and Watson, G.S. (2006) Two-dimensional stick-slip on a soft elastic polymer: pattern generation using atomic force microscopy. Nanotechnology, 17 (10). pp. 2581-2589.

Leong, Kenneth, and Mazierska, Janina (2002) Precise measurements of the Q factor of dielectric resonators in the transmission mode: accounting for noise, crosstalk, delay of uncalibrated lines, coupling loss, and coupling reactance. IEEE Transactions on Microwave Theory and Techniques, 50 (9). pp. 2115-2127.

Book Chapter

Kannan, M. Bobby (2015) Biodegradable polymeric coatings for surface modification of magnesium-based biomaterials. In: Sankara Narayanan, T.S.N., Park, Il-Song, and Lee, Min-Ho, (eds.) Surface Modification of Magnesium and its Alloys for Biomedical Applications, Volume II: modification and coating techniques. Woodhead Publishing Series in Biomaterials, 90 . Elsevier, Cambridge, UK, pp. 355-376.

Bazaka, K., and Bazaka, O. (2015) Superhydrophobic polymers. In: Crawford, Russell J., and Ivanova, Elena P., (eds.) Superhydrophobic Surfaces. Elsevier, Amsterdam, the Netherlands, pp. 67-85.

Hodzic, Alma (2005) Bacterial polyester-based biocomposites: a review. In: Mohanty, Amar K., Misra, Manjusri, and Drzal, Lawrence T., (eds.) Natural Fibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, FL, USA, pp. 597-616.

Hodzic, Alma (2004) Re-use, recycling and degradation of composites. In: Baillie, Caroline, (ed.) Green Composites: polymer composites and the environment. Woodhead Publishing, Cambridge, UK, pp. 252-271.

Conference Item

Yin, Shi, Tuladhar, Rabin, Combe, Mark, Collister, Tony, Jacob, Mohan, and Shanks, Robert (2013) Mechanical properties of recycled plastic fibres for reinforcing concrete. In: Proceedings of the 7th International Conference Fibre Concrete. pp. 1-10. From: 7th International Conference Fibre Concrete, September 12-13 2013, Prague, Czech Republic.

Kazum, O., and Kannan, M. Bobby (2013) Galvanostatic coating of polyaniline on steel. In: Proceedings of the Australasian Corrosion Association Annual Conference. 70. pp. 1-6. From: ACA 2013: Australasian Corrosion Association Annual Conference, 10-13 November 2013, Brisbane, QLD, Australia.

Bazaka, Kateryna, Jacob, Mohan V., Ivanova, Elena P., and Truong, Vi Khanh (2010) Radio frequency plasma enhanced synthesis of antifouling polymeric coatings from monoterpene alcohols. In: Proceedings of TENCON 2010. pp. 1486-1491. From: TENCON 2010, 21-24 November 2010, Fukuoka, Japan.

Zainuddin, , Barnard, Z., Watson, G., Chirila, T.V., and Whittaker, A.K. (2009) Laser radiation modification of PHEMA hydrogels and the effect on the attachment of human corneal epithelial cells. In: Proceedings of the 11th Pacific Polymer Conference 2009. From: 11th Pacific Polymer Conference 2009, 6-10 December 2009, Cairns, QLD, Australia.

Watson, Jolanta A., Brown, Christopher L., Myhra, Sverre, and Watson, Gregory S. (2006) Polymeric surface alteration via scanning probe microscopy. In: Proceedings of the 2006 International Conference on Nanoscience and Nanotechnology. pp. 592-595. From: ICONN 2006: International Conference on Nanoscience and Nanotechnology, 3-7 July 2006, Brisbane, QLD, Australia.

Jacob, Mohan V., Krupka, Jerzy, Mazierska, Janina, and Bialkowski, Merek (2006) Temperature dependence of complex permittivity of planar microwave materials. In: 2006 Asia-Pacific Microwave Conference Proceedings (3) FR1C-2. pp. 1453-1456. From: APMC 2006 Asia Pacific Microwave Conference 2006, 12-15 December 2006, Yokohama, Japan.

Gross, K.A., Yan, F.Y., Berndt, C., and Simon, G.P. (2005) Repair of multi-layered, polymer-based thermal spray coatings. In: Proceedings of International Thermal Spray Conference & Exposition. From: International Thermal Spray Conference & Exposition, 2-4 May 2005, Basel, Switzerland.

Yeow, Y.L., and Leong, Y.K. (2003) Obtaining the shear stress-shear rate function and the wall shear stress-slip velocity function of PVC melts from slit-die viscometry data. In: Proceedings of the Polymer Processing Society Conference . From: 19th Polymer Processing Society Meeting, 7-10 July 2003, Melbourne, VIC, Australia.

Mazierska, Janina, McGrath, Jonathon, and Jacob, Mohan V. (2002) Accuracy comparison of the multifrequency and the three frequencies computations of loss tangent and relative permittivity of low loss dielectric materials using the dielectric resonator technique. In: Proceedings of the 2002 Asia-Pacific Microwave Conference. From: 2002 Asia-Pacific Microwave Conference (APMC 2002), 19-22 November 2002, Kyoto, Japan.

Leong, K., Mazierska, J., Jacob, M.V., Ledenyov, D., and Batt, S. (2002) Comparing unloaded Q-factor of a high-Q dielectric resonator measured using the transmission mode and reflection mode methods involving S-parameters circle fitting. In: Microwave Symposium Digest 2002 (3) pp. 1665-1668. From: IEEE MTT-S International Microwave Symposium, 2-7 June 2002, Seattle, WA, USA.

Book

Pacheco-Torgal, Fernando, Khatib, Jamal, Colangelo, Francesco, and Tuladhar, Rabin (2018) Use of Recycled Plastics in Eco-efficient Concrete. Woodhead Publishing, Duxford, UK.

Brodie, Graham, Jacob, Mohan V., and Farrell, Peter (2015) Microwave and Radio-Frequency Technologies in Agriculture: an introduction for agriculturalists and engineers. De Gruyter Open, Berlin, Germany.

Thesis

Al-jumaili, Ahmed (2019) Fabrication and characterization of antibacterial surfaces derived from geranium essential oil using PECVD. PhD thesis, James Cook University.

Alancherry, Surjith (2018) Development of carbon nanostructures from non-conventional resources. PhD thesis, James Cook University.

Kumar, Avishek (2018) Tailoring the properties of PECVD deposited terpinen-4ol thin films. PhD thesis, James Cook University.

Grant, Daniel Shane (2017) Investigation into the effects of ionising radiation on plasma polymer monoterpene alcohols for applications in organic electronics. PhD thesis, James Cook University.

Yin, Shi (2015) Development of recycled polypropylene plastic fibres to reinforce concrete. PhD thesis, James Cook University.

Ahmad, Jakaria (2015) Synthesis and characterization of plasma polymer thin films from γ-terpinene for encapsulation of electronic devices. PhD thesis, James Cook University.

Vučko, Matthew John (2014) Innovative antifouling technologies: microtexture and metal. PhD thesis, James Cook University.

Bazaka, Kateryna (2011) Fabrication and characterization of plasma polymer thin films from monoterpene alcohols for applications in organic electronics and biotechnology. PhD thesis, James Cook University.