Article

Yin, Shi, Tuladhar, Rabin, Collister, Tony, Combe, Mark, Sivakugan, Nagaratnam, and Deng, Zongcai (2015) Post-cracking performance of recycled polypropylene fibre in concrete. Construction and Building Materials, 101 (Part 1). pp. 1069-1077.

Konthesinghe, K.M. Chaminda, Stewart, Mark G., Ryan, Paraic, Ginger, John, and Henderson, David (2015) Reliability based vulnerability modelling of metal-clad industrial buildings to extreme wind loading for cyclonic regions. Journal of Wind Engineering and Industrial Aerodynamics, 147. pp. 176-185.

Yin, Shi, Tuladhar, Rabin, Shi, Feng, Combe, Mark, Collister, Tony, and Sivakugan, Nagaratnam (2015) Use of macro plastic fibres in concrete: a review. Construction and Building Materials, 93. pp. 180-188.

Yin, Shi, Tuladhar, Rabin, Shanks, Robert A., Collister, Tony, Combe, Mark, Jacob, Mohan, Tian, Ming, and Sivakugan, Nagaratnam (2015) Fiber preparation and mechanical properties of recycled polypropylene for reinforcing concrete. Journal of Applied Polymer Science, 132 (16). 41866. pp. 1-10.

Lovisa, A.C., Henderson, D.J., and Ginger, J.D. (2015) An inexpensive method for measuring deformation of corrugated cladding using close range photogrammetry. Experimental Mechanics, 55 (3). pp. 599-609.

Gover, R.B., Oloyede, A., Thambiratnam, D.P., Thiyahuddin, M.I., and Morris, A. (2015) Experimental and numerical study of polymeric foam efficacy in portable water filled barriers. International Journal of Impact Engineering , 76. 83 - 97.

Wang, Vincent Z., and Ong, K.C.G. (2015) Nonparametric statistical formulations for structural health monitoring. Computers and Structures, 148. pp. 63-74.

Ginger, J., Henderson, D., Humphreys, M., Konthesingha, C., and Stewart, M.G. (2015) Wind loads on the frames of industrial buildings. Australian Journal of Structural Engineering, 16 (2). pp. 169-176.

Smith, Daniel J., Masters, Forrest J., and Gurley, Kurtis R. (2014) An historical perspective on the wind resistance of clay and concrete roofing tiles. Interface, 32 (11). pp. 22-35.

Wang, Vincent Z., and Sivakugan, Siva (2014) Time-invariant and time-variant reliability analyses of reinforced concrete systems with appraisal data missingness. ACI Structural Journal, 111 (5). pp. 1167-1178.

Wang, Vincent Z., and Sivakugan, Nagaratnam (2014) An expectation-maximization algorithm embedded framework for safety assessment of RC systems. ACI Structural Journal, 111 (3). 12-204. pp. 515-524.

Tuladhar, Rabin, and Lancini, Benjamin J. (2014) Ductility of concrete slabs reinforced with low-ductility welded wire fabric and steel fibers. Structural Engineering and Mechanics, 49 (4). pp. 449-461.

Holmes, John D., Allsop, Andrew C., and Ginger, John D. (2014) Gust durations, gust factors and gust response factors in wind codes and standards. Wind & Structures, 19 (3). pp. 339-352.

Wang, Vincent Z., and Ginger, John D. (2014) Maximum a posteriori estimation based wind fragility analysis with application to existing linear or hysteretic shear frames. Structural Engineering and Mechanics, 50 (5). pp. 653-664.

Wang, Vincent Z., Mallett, Michael, and Priory, Andrew (2014) Seismic fragility evaluation with incomplete structural appraisal data: an iterative statistical approach. Journal of Structural Engineering, 140 (2). 04013048. pp. 1-13.

Lovisa, Amy C., Wang, Vincent Z., Henderson, David J., and Ginger, John D. (2013) Development and validation of a numerical model for steel roof cladding subject to static uplift loads. Wind & Structures, 17 (5). pp. 495-513.

Wang, Vincent Z., and Lyons, Emma (2013) Large-sample normal approximation and relevant sensitivity in linear seismic fragility analysis with hierarchically modeled stiffness properties. Probabilistic Engineering Mechanics, 34. pp. 91-100.

Henderson, David, Williams, Curtis, Gavanski, Eri, and Kopp, Gregory A. (2013) Failure mechanisms of roof sheathing under fluctuating wind loads. Journal of Wind Engineering and Industrial Aerodynamics, 114. pp. 27-37.

Kim, P.Y., and Ginger, J.D. (2013) Internal pressures in buildings with a dominant opening and background porosity. Wind & Structures, 16 (1). pp. 47-60.

Tuladhar, R., Mutsuyoshi, H., and Maki, T. (2013) Numerical modelling and full-scale testing of concrete piles under lateral loading. Australian Journal of Structural Engineering, 14 (3). pp. 229-242.

Henderson, David J., Morrison, Murray J., and Kopp, Gregory A. (2013) Response of toe-nailed, roof-to-wall connections to extreme wind loads in a full-scale, timber-framed, hip roof. Engineering Structures, 56. pp. 1474-1483.

Laboy-Rodriguez, Sylvia T., Smith, Daniel, Gurley, Kurtis R., and Masters, Forrest J. (2013) Roof tile frangibility and puncture of metal window shutters. Wind & Structures, 17 (2). pp. 185-202.

Miller, Craig, Holmes, John, Henderson, David, Ginger, John, and Morrison, Murray (2013) The response of the dines anemometer to gusts and comparisons with cup anemometers. Journal of Atmospheric and Oceanic Technology, 30 (7). pp. 1320-1336.

Morrison, Murray J., Henderson, David J., and Kopp, Gregory A. (2012) The response of a wood-frame, gable roof to fluctuating wind loads. Engineering Structures, 41. pp. 498-509.

Wang, Vincent Z., Ginger, John D., and Narayan, Krishneel (2012) Intralaminar and interlaminar fracture characterization in glued-laminated timber members using image analysis. Engineering Fracture Mechanics, 82. pp. 73-84.

Holmes, J.D., and Ginger, J.D. (2012) Internal pressures - The dominant windward opening case: a review. Journal of Wind Engineering and Industrial Aerodynamics, 100 (1). pp. 70-76.

Kopp, Gregory A., Morrison, Murray J., and Henderson, David J. (2012) Full-scale testing of low-rise, residential buildings with realistic wind loads. Journal of Wind Engineering and Industrial Aerodynamics, 104-106. pp. 25-39.

Holmes, J.D., and Ginger, J.D. (2012) The gust wind speed duration in AS/NZS 1170.2. Australian Journal of Structural Engineering, 13 (3). pp. 207-216.

Jayasinghe, N.C., and Ginger, J.D. (2011) Vulnerability of roofing components to wind loads. Wind & Structures, 14 (4). pp. 321-335.

Walker, G. (2011) Comparison of the impacts of Cyclone Tracy and the Newcastle earthquake on the Australian building and insurance industries. Australian Journal of Structural Engineering, 11 (3). pp. 283-293.

Walker, George R. (2011) Modelling the vulnerability of buildings to wind — a review. Canadian Journal of Civil Engineering, 38 (9). pp. 1031-1039.

Henderson, David J., and Ginger, John D. (2011) Response of pierced fixed corrugated steel roofing systems subjected to wind loads. Engineering Structures, 33 (12). pp. 3290-3298.

Kopp, Gregory A., Morrison, Murray J., Gavanski, Eri, Henderson, David J., and Hong, Han Ping (2010) "Three Little Pigs" Project: hurricane risk mitigation by integrated wind tunnel and full-scale laboratory tests. Natural Hazards Review, 11 (4). pp. 151-161.

Ginger, J.D., Holmes, J.D., and Kim, P.Y. (2010) Variation of internal pressure with varying sizes of dominant openings and volumes. Journal of Structural Engineering, 136 (10). pp. 1319-1326.

Leitch, C., Ginger, J., Harper, B., Kim, P., Jayasinghe, N., and Somerville, L. (2010) Performance of housing in Brisbane following storms on 16 November 2008. Australian Journal of Structural Engineering, 11 (1). pp. 45-62.

Liow, Jong-Leng, and Frye, Ulrich (2010) Surfaces machined by micro end-mills at constant chip load. Key Engineering Materials, 443. pp. 232-237.

Henderson, David J., Ginger, John D., Morrison, Murray J., and Kopp, Gregory A. (2009) Simulated tropical cyclonic winds for low cycle fatigue loading of steel roofing. Wind & Structures, 12 (4). pp. 381-398.

Ginger, John D., Holmes, John D., and Kopp, Gregory A. (2008) Effect of building volume and opening size on fluctuating internal pressure. Wind & Structures, 11 (5). pp. 361-376.

Henderson, David, and Ginger, John (2008) Role of building codes and construction standards in windstorm disaster mitigation. Australian Journal of Emergency Management, 23 (2). pp. 40-46.

Tuladhar, Rabin, Maki, Takeshi, and Mutsuyoshi, Hiroshi (2008) Cyclic behavior of laterally loaded concrete piles embedded into cohesive soil. Earthquake Engineering and Structural Dynamics, 37 (1). pp. 43-59.

Tuladhar, Rabin, Mutsuyoshi, Hiroshi, and Maki, Takeshi (2007) Analytical study of influence of pile modeling on the response behavior of concrete structures. Proceedings of the Japan Concrete Institute, 29 (3). 847- 852.

Henderson, D.J., and Ginger, J.D. (2007) Vulnerability model of an Australian high-set house subjected to cyclonic wind loading. Wind & Structures, 10 (3). pp. 269-285.

Maki, Takeshi, Mutsuyoshi, Hiroshi, Tuladhar, Rabin, and Daigo, Koji (2007) Restoring force and deformation of large-scale concrete pile embedded into cohesive soil. Doboku Gakkai Ronbunshuu E, 63 (3). pp. 396-409.

Ginger, J.D., Henderson, D.J., Leitch, C.J., and Boughton, G.N. (2007) Tropical Cyclone Larry: Estimation of wind field and assessment of building damage. Australian Journal of Structural Engineering, 7 (3). pp. 209-224.

Tuladhar, Rabin, Mutsuyoshi, Hiroshi, Maki, Takeshi, and Daigo, Kohji (2006) Analytical study on seismic behavior of full-scale concrete piles in cohesive soil. Proceedings of the Japan Concrete Institute, 28 (2). pp. 1045-1050.

Daigo, Kohji, Tuladhar, Rabin, Mutsuyoshi, Hiroshi, and Maki, Takeshi (2006) Seismic behavior of full-scaled concrete piles embedded into ground. Proceedings of Japan Concrete Institute, 28 (2). pp. 1039-1044.

Loughran, J.G., and Kannapiran, Arasu (2005) Three-dimensional simulation of the rolling of a saturated fibro-porous media. Finite Elements in Analysis and Design, 42 (1). pp. 90-104.

Adam, C., and Loughran, J. (2005) The effect of blanket thickness on extraction energy in sugarcane rolling mills: a finite element investigation. Biosystems Engineering, 92 (2). pp. 255-263.

Tuladhar, Rabin, Mutsuyoshi, Hiroshi, Maki, Takeshi, and Daigo, Kohji (2005) Lateral loading tests of full-scaled concrete piles embedded into the ground. Proceedings of the Japan Concrete Institute, 27 (2). pp. 919-924.

Ginger, J.D. (2004) Fluctuating wind loads across gable-end buildings with planar and curved roofs. Wind & Structures, 7 (6). pp. 359-372.

Tuladhar, Rabin, Yamazaki, Fumio, Warnitchai, Pennung, and Saita, Jun (2004) Seismic microzonation of the greater Bangkok area using microtremor observations. Earthquake Engineering and Structural Dynamics, 33 (2). pp. 211-255.

Duan, Mei (2004) Splitting behaviour analysis of steel cladding systems. Key Engineering Materials, 274-276. pp. 151-156.

Ginger, J.D., and Holmes, J.D. (2003) Effect of building length on wind loads on low-rise buildings with a steep roof pitch. Journal of Wind Engineering and Industrial Aerodynamics, 91 (11). pp. 1377-1400.

Ginger, J.D., Reardon, G.F., and Whitbread, B.J. (2000) Wind load effects and equivalent pressures on low-rise house roofs. Engineering Structures, 22 (6). pp. 638-646.

Liu, T., Karunasena, W.M., Kitipornchai, S., and Veidt, M. (2000) The influence of backward wave transmission on quantitative ultrasonic evaluation using Lamb wave propagation. Journal of the Acoustical Society of America, 107 (1). pp. 306-314.

Ginger, John D. (2000) Internal pressures and cladding net wind loads on full-scale low-rise building. Journal of Structural Engineering, 126 (4). pp. 538-543.

Report

Smith, Daniel, Henderson, David, Ginger, John, Wehner, Martin, Ryu, Hyeuk, and Edwards, Mark (2016) Improving the Resilience of Existing Housing to Severe Wind Events: annual project report 2015-2016. Report. Bushfire and Natural Hazards CRC.

Smith, Daniel, Henderson, David, Ginger, John, and Wehner, Martin (2015) Improving the Resilience of Existing Housing to Severe Wind Events: annual project report 2014-2015. Report. Bushfire and Natural Hazards CRC.

Smith, Daniel, and Henderson, David (2015) Cost-benefit of Retrofitting and Community Engagement with Mitigation [Report for Suncorp Group Limited]. Report. Cyclone Testing Station, Townsville, QLD, Australia.

Smith, Daniel, and Henderson, David (2015) Insurance Claims Data Analysis for Cyclones Yasi and Larry [Report for Suncorp Group Limited]. Report. Cyclone Testing Station, Townsville, QLD, Australia.

Boughton, G., and Falck, D. (2007) Tropical Cyclone George: damage to buildings in the Port Hedland area. Report. James Cook University, Townsville, QLD, Australia.

Conference Item

Bodhinayake, G.G., Ginger, J.D., and Henderson, D.J. (2018) Correlation of internal and external pressures on building cladding elements. In: Proceedings of the 19th Australasian Wind Engineering Society Workshop. From: AWES19: 19th Australasian Wind Engineering Society Workshop, 4-6 April 2018, Torquay, VIC, Australia.

Tamanna, Nafisa, Sutan, Norsuzailina Mohamed, and Tuladhar, Rabin (2018) The effect of waste glass powder on microstructural behaviour when used a partial cement replacement. In: [Presented at the 5th International fib Congress]. From: FIB 2018: 5th International fib Congress, 7-11 October 2018, Melbourne, VIC, Australia.

Dewey, Justin, and Tuladhar, Rabin (2017) Behaviour of round notched timber sections. In: 8th Australian Small Bridges Conference. From: 8th Australian Small Bridges Conference, 27-28 November 2017, Gold Coast, QLD, Australia.

Dewey, Justin, Tuladhar, Rabin, Mullamphy, Lara, and McCormack, Lucy (2017) Effects of notching on timber girder performance. In: [Presented at the 3rd International Conference on Timber Bridges]. From: ICTB 2017: 3rd International Conference on Timber Bridges, 26-29 June 2017, Skelleftea, Sweden.

Parackal, Korah I., Ginger, John D., Smith, Daniel J., and Henderson, David J. (2017) Load sharing between batten to rafter connections under wind loading. In: Proceedings of the 13th Americas Conference on Wind Engineering. From: 13th Americas Conference on Wind Engineering, 21-24 May 2017, Gainesville, FL, USA.

Satheeskumar, N., Henderson, D.J., Ginger, J.D., and Wang, C-.H. (2017) Three-dimensional modelling of the timber-framed house to uplift loading. In: Proceedings of the 24th Australasian Conference on the Mechanics of Structures and Materials. pp. 1905-1910. From: ACMSM24: 24th Australasian Conference on the Mechanics of Structures and Materials, 6-10 December 2016, Perth, WA, Australia.

Smith, Daniel J., and Henderson, David J. (2016) Vulnerability modelling for residential housing. In: [Presented at 18th Australasian Wind Engineering Society Workshop]. From: 18th Australasian Wind Engineering Society Workshop, 6-8 July 2016, McLaren Vale, SA, Australia.

Parackal, Korah, Ginger, John, and Henderson, David (2016) Correlation of peak wind loads at batten-truss connections. In: Proceedings of the 18th Australasian Wind Engineering Society Workshop. pp. 1-4. From: AWES18: 18th Australasian Wind Engineering Society Workshop, 6-8 July 2016, McLaren Vale, SA, Australia.

Humphreys, M.T., Ginger, J.D., and Henderson, D.J. (2016) Internal pressure fluctuations in industrial buildings. In: Proceedings of the 18th Australasian Wind Engineering Society Workshop. pp. 1-4. From: AWES18: 18th Australasian Wind Engineering Society Workshop, 6-8 July 2016, McLaren Vale, SA, Australia.

Satheeskumar, N., Henderson, D.J., Ginger, J.D., and Wang, C.H. (2015) Load sharing and structural response of timber-framed house. In: Proceedings of the Second International Conference on Performance–based and Life-cycle Structural Engineering. 140. pp. 810-819. From: PLSE 2015: Second International Conference on Performance-based and Lifecycle Structural Engineering, 9-11 December 2015, Brisbane, QLD, Australia.

Henderson, David, Smith, Daniel, and Ginger, John (2015) Strata title and wind storms. In: [Presented at Strata and Community Title in Australia for the 21st Century 2015]. From: Strata and Community Title in Australia for the 21st Century 2015, 2-4 September 2015, Gold Coast, QLD, Australia.

Parackal, K.I., Mason, M., Henderson, D.J., Smith, D.J., and Ginger, J.D. (2015) Investigation of damage: Brisbane 27 November 2014 severe storm event. In: Research Proceedings from the Bushfire and Natural Hazards CRC & AFAC Conference Adelaide, 1-3 September 2015. pp. 240-248. From: AFAC 2015: Australasian Fire and Emergency Service Authorities Council Conference 2015, 1-3 September 2015, Adelaide, SA, Australia.

Mason, M., Smith, D., and Henderson, D. (2015) Inference of surface wind speeds during Tropical Cyclone Marcia based on damage observations. In: [Presented at Australian Meteorological and Oceanographic Society National Conference 2015]. 318. From: AMOS 2015: Australian Meteorological and Oceanographic Society National Conference 2015, 15-17 July 2015, Brisbane, QLD, Australia.

Smith, Daniel J., Henderson, David J., and Ginger, John D. (2015) Insurance loss drivers and mitigation for Australian housing in severe wind events. In: [Presented at 14th International Conference on Wind Engineering]. 02735. pp. 1-9. From: ICWE14: 14th International Conference on Wind Engineering, 21-26 June 2015, Porto Alegre, Brazil.

Satheeskumar, N., Henderson, D., Ginger, J., and Wang, C.H. (2015) Wind loading effects on roof to wall connection in a timber frame structure. In: Proceedings of the 14th International Conference on Wind Engineering. pp. 1-11. From: ICWE 2015: 14th International Conference on Wind Engineering, 21-26 June 2015, Porto Alegre, Brazil.

Smith, Daniel J., and Masters, Forrest J. (2015) A study of wind load interaction for roofing field tiles. In: [Presented at 14th International Conference on Wind Engineering]. 02744. pp. 1-9. From: ICWE14: 14th International Conference on Wind Engineering, 21-26 June 2015, Porto Alegre, Brazil.

Smith, D.J., Henderson, D.J., and Ginger, J.D. (2015) Improving the wind resistance of Australian legacy housing. In: [Presented at 17th Australasian Wind Engineering Society Workshop]. From: 17th Australasian Wind Engineering Society Workshop, 12-13 February 2015, Wellington, New Zealand.

Parackal, K.I., Humphreys, M.T., Ginger, J.D., and Henderson, D.J. (2015) Wind loads on contemporary Australian housing. In: Presentations from the 17th Australasian Wind Engineering Society Workshop. pp. 1-4. From: AWES17: 17th Australasian Wind Engineering Society Workshop, 12-13 Feb 2015, Wellington, New Zealand.

Satheeskumar, N., Henderson, D., Ginger, J., and Wang, C.H. (2015) Loading effects on timber truss to wall connection in a contemporary house. In: Presentations from the 17th Australasian Wind Engineering Society Workshop. pp. 1-4. From: AWES17: 17th Australasian Wind Engineering Society Workshop, 12-13 February 2015, Wellington, New Zealand.

Yin, Shi, Tuladhar, Rabin, Collister, Tony, Combe, Mark, and Sivakugan, Nagaratnam (2015) Mechanical properties and post-crack behaviours of recycled PP fibre reinforced concrete. In: Proceedings of the 27th Biennial National Conference of the Concrete Institute of Australia. pp. 414-421. From: Concrete 2015: 27th Biennial National Conference of the Concrete Institute of Australia, 30 August - 2 September 2015, Melbourne, VIC, Australia.

Tan, D., Reid, C., Rajeev, P., Piratheepan, J., and Sivakugan, N. (2014) Earth pressure development in integral abutment bridge subjected to thermal loadings. In: Proceedings of the 8th Australasian Congress on Applied Mechanics. From: ACAM 8: 8th Australasian Congress on Applied Mechanics, 23-26 November 2014, Melbourne, VIC, Australia.

Rajeev, P., Bui, H., and Sivakugan, N. (2014) Seismic earth pressure development in sheet pile retaining walls: a numerical study. In: Proceedings of the 8th Australasian Congress on Applied Mechanics. From: ACAM 8: 8th Australasian Congress on Applied Mechanics, 23-26 November 2014, Melbourne, VIC, Australia.

Walsh, Christian, and Wang, Vincent Z. (2014) Towards the reliability quantification of recyclable precast concrete elements and sub-assemblies: a feasibility exploration of the application of an expectation-maximization algorithm embedded safety assessment technique. In: Proceedings of 2014 International Conference on Intelligent Green Building and Smart Grid. pp. 1-4. From: IGBSG 2014: 1st International Conference on Intelligent Green Building and Smart Grid, 23-25 April 2014, Taipei, Taiwan.

Yin, Shi, Tuladhar, Rabin, Combe, Mark, Collister, Tony, Jacob, Mohan, and Shanks, Robert (2013) Mechanical properties of recycled plastic fibres for reinforcing concrete. In: Proceedings of the 7th International Conference Fibre Concrete. pp. 1-10. From: 7th International Conference Fibre Concrete, September 12-13 2013, Prague, Czech Republic.

Wang, Vincent Z., Ginger, John D., and Henderson, David J. (2013) Evaluation of wind fragilities of existing multi-story shear frames using maximum a posteriori estimation. In: Proceedings of the 2013 World Congress on Advances in Structural Engineering and Mechanics. pp. 796-804. From: ASEM 2013: World Congress on Advances in Structural Engineering and Mechanics, 8-12 September 2013, Jeju, South Korea.

Wang, Vincent Z., Ginger, John D., and Henderson, David J. (2013) A surrogate model for a type of nonlinear hysteretic system with application to wind response analysis. In: Proceedings of the 2013 World Congress on Advances in Structural Engineering and Mechanics. pp. 2816-2823. From: ASEM 2013: World Congress on Advances in Structural Engineering and Mechanics, 8-12 September 2013, Jeju, South Korea.

Kopp, Gregory A., Khan, Mohammad Abrar Alam, Henderson, David J., and Morrison, Murray J. (2013) Analysis of wood-framed roof failures under realistic hurricane wind loads. In: Proceedings of the 2012 ATC and SEI Conference on Advances in Hurricane Engineering: Advances in Hurricane Engineering: learning from our past (1) pp. 1078-1089. From: 2012 ATC and SEI Conference on Advances in Hurricane Engineering: learning from our past, 24-26 October 2012, Miami, FL, USA.

Tuladhar, Rabin, Sexton, Aaron, and Joyce, Paul (2013) Durability of concrete with pitchstone fines as a partial cement replacement. In: Proceedings of Concrete Institute of Australia’s Biennial National Conference. From: Concrete 2013: Concrete Institute of Australia’s Biennial National Conference, 16-18 October 2013, Gold Coast, QLD, Australia.

Henderson, David, Mason, Matthew, and Ginger, John (2013) SWIRLnet: portable anemometer network for wind speed measurements of land-falling tropical cyclones. In: Proceedings of the12th Americas Conference on Wind Engineering (3) pp. 1349-1356. From: 12ACWE: 12th Americas Conference on Wind Engineering: wind effects on structures, communities, and energy generation, 16-20 June 2013, Seattle, WA, USA.

Laboy, Sylvia, Smith, Daniel, Fernandez, George, Masters, Forrest, and Gurley, Kurtis (2012) Residential fenestration vulnerability to windborne debris. In: [Presented at ATC & SEI Conference on Advances in Hurricane Engineering 2012: learning from our past] (1) pp. 328-336. From: ATC & SEI Conference on Advances in Hurricane Engineering 2012: learning from our past, 24-26 October 2012, Miami, FL, USA.

Jayasinghe, N.C., Ginger, J.D., Henderson, D.J., and Walker, G.R. (2012) Distribution of wind loads in roofing connections. In: Australasian Structural Engineering Conference-Proceedings. 36. pp. 1-8. From: Australasian Structural Engineering Conference 2012 (ASEC12), 11-13 July 2012, Perth, WA, Australia.

Boughton, G.N., Henderson, D.J., Leitch, C.J., and Ginger, J.D. (2012) Structural lessons for housing from TC Yasi February 2011. In: Australasian Structural Engineering Conference-Proceedings. 46. pp. 1-8. From: Australasian Structural Engineering Conference 2012 (ASEC12), 11-13 July 2012, Perth, WA, Australia.

Lovisa, A.C., Wang, V.Z., Henderson, D.J., and Ginger, J.D. (2012) A finite element model for pierced-fixed, corrugated metal roof cladding subject to uplift wind loads. In: Australasian Structural Engineering Conference-Proceedings. 37. pp. 1-8. From: Australasian Structural Engineering Conference 2012 (ASEC12), 11-13 July 2012, Perth, WA, Australia.

Wang, Vincent Z., Pease, Trent, and Robinson, Sean (2012) Implications of selected parameter estimation schemes to reinforced concrete member reliability analysis with incomplete structural appraisal data. In: Proceedings of the 37th Conference on Our World in Concrete & Structures. 100037044. pp. 435-442. From: The 37th Conference on Our World in Concrete & Structures, 29-31 August 2012, Singapore.

Boughton, Geoff, and Henderson, David (2012) Tropical cyclone Yasi - load testing for timber houses on a large scale. In: Proceedings of the World Conference on Timber Engineering (2) pp. 460-468. From: World Conference on Timber Engineering 2012: Strength and Serviceability - Extreme Events, WCTE 2012, 15-19 July 2012, Auckland, NZL.

Tuladhar, Rabin, Lancini, Benjamin J., and Collister, Tony (2011) Structural behaviour of steel fibre reinforced concrete slabs with class L reinforcement. In: Proceedings of Concrete 2011: building a sustainable future. 196. pp. 1-10. From: Concrete 2011: building a sustainable future, 12-14 October 2011, Perth, WA, Australia.

Tuladhar, R., Smith, M., Pandey, G.R., and Joyce, P. (2011) Use of pitchstone fine as a partial replacement of portland cement for sustainable concrete. In: Proceedings of 2011 International Concrete Sustainability Conference. pp. 1-13. From: 2011 International Concrete Sustainability Conference, 9-11 August 2011, Boston, MA, USA.

Wang, Vincent Z., Mallett, Michael, and Priory, Andrew (2011) Sensitivity of the seismic fragility evaluation of a multi-story shear frame to the appraisal data missingness. In: Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics. pp. 188-195. From: The 2011 World Congress on Advances in Structural Engineering and Mechanics, 18-22 September 2011, Seoul, South Korea.

Lyons, Emma, and Wang, Vincent Z. (2010) Effect of material degradation models on the safety performance of reinforced concrete members subject to extreme loading. In: Proceedings of the 35th Conference on Our World in Concrete & Structures. pp. 17-24. From: 35th Conference on Our World in Concrete & Structures, 25-27 August 2010, Singapore.

Wehner, Martin, Ginger, John, Holmes, John, Sandland, Carl, and Edwards, Mark (2010) Development of methods for assessing the vulnerability of Australian residential building stock to severe wind. In: IOP Conference Series: Earth and Environmental Science (11) 012017. pp. 1-6. From: 17th National Conference of the Australian Meteorological and Oceanorgraphic Society, 27-29 January 2010, Canberra, ACT, Australia.

Henderson, David J., and Ginger, John D. (2010) Fluctuating wind loads for cladding design. In: Proceedings of The 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference 2010. pp. 150-155. From: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference, 8-12 August 2010, Sydney, NSW, Australia.

Ginger, John, Henderson, David, Edwards, Mark, and Holmes, John (2010) Housing damage in windstorms and mitigation for Australia. In: Proceedings of 2010 APEC-WW and IG-WRDRR Joint Workshop: Wind-Related Disaster Risk Reduction Activities in Asia-Pacific Region and Cooperative Actions. pp. 1-18. From: 2010 APEC-WW and IG-WRDRR Joint Workshop: Wind-Related Disaster Risk Reduction Activities in Asia-Pacific Region and Cooperative Actions, 24 October 2010, Incheon, Korea.

Henderson, David, Ginger, John, Morrison, Murray, and Kopp, Gregory A. (2009) Application of simulated cyclonic wind loads on roof cladding. In: Proceedings of the 11th Americas Conference on Wind Engineering. From: 11th Americas Conference on Wind Engineering, 22-26 June 2009, San Juan, Puerto Rico.

Holmes, J.D., and Ginger, J.D. (2009) Codification of internal pressures for building design. In: Proceedings of Seventh Asia-Pacific Conference on Wind Engineering. pp. 1-8. From: Seventh Asia-Pacific Conference on Wind Engineering, 8-12 November 2009, Taipei, Taiwan.

Frye, Ulrich, Ginger, John, and Mullins, Peter (2009) Response of cladding to windborne debris impact. In: Seventh Asia-Pacific Conference on Wind Engineering (APCWE-VII) . From: Proceedings of the Seventh Asia-Pacific Conference on Wind Engineering (APCWE-VII) , 8 -12 November 2009, Taipei, Taiwan.

Kim, Peter, and Ginger, John (2009) Variation of internal pressure with size of dominant opening and volume. In: Seventh Asia-Pacific Conference on Wind Engineering (APCWE-VII) . From: Proceedings of the Seventh Asia-Pacific Conference on Wind Engineering (APCWE-VII) , 8-12 November 2009, Taipei, Taiwan.

Tuladhar, Rabin, Mutsuyoshi, Hiroshi, and Maki, Takeshi (2008) Soil-pile-structure interaction using 3D FEM. In: Futures in Mechanics of Structures and Materials (1) pp. 269-275. From: ACMSM20 20th Australasian Conference on the Mechanics of Structures of Materials, 2 - 5 December 2008, Toowoomba, QLD, Australia.

Pandey, G.R., Mutsuyoshi, H., and Tuladhar, R. (2008) Seismic retrofitting of reinforced concrete bridge frames using external bonded FRP sheets. In: Proceedings of the 14th World Conference on Earthquake Engineering (11) 11-0092. pp. 1-8. From: 14WCEE 14th World Conference on Earthquake Engineering, 12-17 October 2008, Beijing, China.

Tuladhar, R., Mutsuyoshi, H., and Maki, T. (2008) Seismic behavior of concrete bridge pier considering soil-pile-structure interaction. In: Proceedings of the 14th World Conference on Earthquake Engineering (5) 05-02-0075. pp. 1-8. From: 14WCEE 14th World Conference on Earthquake Engineering, 12-17 October 2008, Beijing, China.

Henderson, D., Ginger, J., Berndt, C., and Kopp, G.A. (2008) Fatigue failure of G550 steel building components during wind loading. In: Proceedings of the Australasian Structural Engineering Conference 2008. pp. 437-446. From: Australasian Structural Engineering Conference 2008, 26-27 June 2008, Melbourne, VIC, Australia.

Henderson, D., Ginger, J., and Morrison, M. (2008) New Australian cyclonic wind induced fatigue loading criteria for roofing. In: Proceedings of the Australasian Structural Engineering Conference 2008. pp. 427-436. From: Australasian Structural Engineering Conference 2008, 26-27 June 2008, Melbourne, VIC, Australia.

Maki, T., Tuladhar, R., and Mutsuyoshi, H. (2007) RC pile foundation-soil interaction analysis using 3D finite element method. In: Proceedings of the 4th International Conference on Urban Earthquake Engineering (3) pp. 617-624. From: 4th International Conference on Urban Earthquake Engineering, 2007, Tokyo, Japan.

Shinozaki, Hino, Aravinthan, Thiru, Pandey, Govinda Raj, and Mutsuyoshi, Hiroshi (2007) Advancements in retrofitting reinforced concrete structures in Japan using FRP sheets. In: Proceedings of the 23rd Biennial Conference of the Concrete Institute of Australia. pp. 563-571. From: Concrete 07: Design, Materials & Construction: concrete for the future, 18-20 October 2007, Adelaide, SA, Australia.

Dao, Vinh, Dux, Peter, and Morris, Peter (2007) Effectiveness of permeability-reducing admixtures in marine concrete. In: Proceedings of Concrete under severe conditions - environment and loading CONSEC'07 (1) pp. 449-456. From: 5th International conference on concrete under severe conditions of environment and loading, 4-6 June 2007, Tours, France.

Pandey, G.R., Mutsuyoshi, H., and Aravinthan, T. (2007) Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets. In: Proceedings of the First Asia Pacific Conference on FRP in Structures (1) pp. 79-86. From: Asia-Pacific Conference on FRP in Structures, 12-14 December 2007, Hong Kong, China.

Tuladhar, Rabin, Mutsuyoshi, Hiroshi, and Maki, Takeshi (2006) Full-scale test on concrete piles under seismic loading. In: Proceedings of the First European Conference on Earthquake Engineering and Seismology. 745. pp. 1-9. From: First European Conference on Earthquake Engineering and Seismology, 3 - 8 September 2006, Geneva, Switzerland.

Loughran, J.G., and Leonardi, C. (2005) Application of discrete element methods to modelling of belt feeders. In: Proceedings of the Fourth Australasian Congress on Applied Mechanics. pp. 119-124. From: Fourth Australasian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Henderson, D.J., and Ginger, J.D. (2005) Fatigue failure of roof components subjected to wind loading. In: Proceedings of Australian Structural Engineering Conference 2005. pp. 1-8. From: Australian Structural Engineering Conference 2005, 11 - 14 September 2005, Newscastle, NSW, Australia.

Ginger, J.D., and Henderson, D.J. (2005) Reliability of metal-clad, low-rise, low-pitch roofs subjected to wind loads. In: Proceedings of Australian Structural Engineering Conference 2005. pp. 1-8. From: Australian Structural Engineering Conference 2005, 11 - 14 September 2005, Newscastle, NSW, Australia.

Loughran, J.G., and Anderson, S.I. (2005) Simulation and modeling of the penetration of brittle-ductile assemblies under large deformation. In: Proceedings of the 1st International Conference in Engineering in Materials 2004. From: 1st International Conference in Engineering in Materials 2004, 12-14 July 2004, Townsville, QLD, Australia.

Karunasena, W., and Anderson, W.C. (2005) Strength and ductility prediction of concrete beams reinforced with internal steel and external composite materials. In: Proceedings of 4th Australian Congress on Applied Mechanics. pp. 561-566. From: 4th Australian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Tuladhar, Rabin, Cuong, Nhu Nguyen Hong, and Yamazaki, Fumio (2004) Seismic microzonation of Hanoi, Vietnam using microtremor observations. In: Proceedings of 13th World Conference on Earthquake Engineering. 2539. pp. 1-8. From: 13th World Conference on Earthquake Engineering, 1-6 August 2004, Vancouver, BC, Canada.

Hughes, W.D., and Karunasena, W.M. (2004) Factors affecting debonding of FRP (fiber-reinforced polymer) rehabilitated concrete beams. In: Proceedings of the 3rd International Conference on Advances in Structural Engineering and Mechanics. pp. 871-880. From: 3rd International Conference on Advances in Structural Engineering and Mechanics, 2-4 Sep 2004, Seoul, Korea.

Karunasena, W.M. (2004) Numerical modelling of obliquely incident guided wave scattering by a crack in a laminated composite plate. In: Proceedings of Structural Integrity and Fracture Conference 2004. pp. 181-187. From: Structural Integrity and Fracture, 26-29 September 2004, Brisbane, QLD, Australia.

Hardeo, P., and Karunasena, W. (2003) Buckling of fibre-reinforced plywood plates. In: Proceedings of Second International Conference on Structural Stability and Dynamics (1) pp. 442-447. From: Second International Conference on Structural Stability and Dynamics, 16-18 December 2002, Singapore.

Duan, M. (2003) Finite element analysis of a laminated timber bridge. In: Poceedings of the 10th Asia-Pacific Vibration Conference (1) pp. 104-108. From: 10th Asia Pacific Vibration Conference, 12-14 November 2003, Gold Coast, QLD, Australia.

Karunasena, W., Hardeo, P., and Bosnich, G. (2002) Rehabilitation of concrete beams by externally bonding fibre composite reinforcement. In: Proceedings of ACUN-4 International Composites Conference. pp. 222-226. From: Composite Systems: Macrocomposites, Microcomposites, Nanocomposites, 21-25 July 2002, Sydney, NSW, Australia.

Book

Pacheco-Torgal, Fernando, Khatib, Jamal, Colangelo, Francesco, and Tuladhar, Rabin (2018) Use of Recycled Plastics in Eco-efficient Concrete. Woodhead Publishing, Duxford, UK.

Holmes, J.D., Kwok, K.C.S., and Ginger, J.D. (2012) Wind Loading Handbook for Australia and New Zealand: background to AS/NZS1170.2 wind actions. AWES-HB-001-2012 . Australasian Wind Engineering Society, Sydney, NSW, Australia.

Tuladhar, Rabin, Yamazaki, Fumio, and Warnitchai, Pennung (2009) Microzonation of Greater Bangkok Using Microtremor Technique. Lambert Academic Publishing, Germany.

Mutsuyoshi, Hiroshi, Tuladhar, Rabin, Aravinthan, Thiru, and Minh, Ha (2007) Guidelines for Design and Construction of Grouting for Prestressed Concrete Structures. Japan Prestressed Concrete Engineering Association, Tokyo, Japan.

Thesis

Tamanna, Nafisa (2020) Use of waste glass as aggregate and cement replacement in concrete. PhD thesis, James Cook University.

Parackal, Korah Ipeson (2018) The structural response and progressive failure of batten to rafter connections under wind loads. PhD thesis, James Cook University.

Osborn, Eric Peter (2016) Characteristic wind actions on large flat roofed porous canopies. Masters (Research) thesis, James Cook University.

Satheeskumar, Navaratnam (2016) Wind load sharing and vertical load transfer from roof to wall in a timber-framed house. PhD thesis, James Cook University.

Lovisa, Amy (2015) Characterising the fatigue response of corrugated roof cladding. PhD thesis, James Cook University.

Kim, Peter Young-Han (2012) Characteristics of internal pressures in buildings with a dominant opening. Masters (Research) thesis, James Cook University.

Jayasinghe, Nandana Chana (2012) The distribution of wind loads and vulnerability of metal clad roofing structures in contemporary Australian houses. PhD thesis, James Cook University.

Henderson, David James (2010) Response of pierced fixed metal roof cladding to fluctuating wind loads. PhD thesis, James Cook University.

Johnson, Kate (2005) Load-deformation behaviour of foundations under vertical and oblique loads. PhD thesis, James Cook University.

Keir, John (2004) An analytical and experimental investigation of active vibration control techniques on coupled plate structures. PhD thesis, James Cook University.