Simulating the response of shallow foundations using finite element modelling
Johnson, K., Christensen, M., Sivakugan, S., and Karunasena, W. (2003) Simulating the response of shallow foundations using finite element modelling. Proceedings of the MODSIM 2003 International Congress on Modelling and Simulation. MODSIM 2003 International Congress on Modelling and Simulation , 14-17 July 2003, Townsville, QLD, Australia , pp. 2060-2065.
|PDF (Published Version) - Repository staff only - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader|
View at Publisher Website: http://www.mssanz.org.au/MODSIM03/Volume...
In 1994, the Federal Highway Administration held a symposium to recognise the various techniques for predicting settlements of shallow foundations. Thirty one predictions were received for five spread footings, sixteen of these estimates were made by academics and consultants gave the remaining fifteen. Each of the participants were allowed access to a vast amount of site test data and were required to give predictions for the loads which would result in the footing settling 25 mm and 150 mm. It was noted that most participants preferred to use traditional semi-empirical methods to predict the load for 25 mm settlement. However the load corresponding to 150 mm proved to be difficult, as traditional methods do not compensate for the highly plastic strain region of the load-displacement behaviour. Eight of the participants chose to use finite element modelling to simulate the constitutive behaviour of the soil profile. All eight models devised by the estimators consisted of eight noded axisymmetric elements. Even though all meshes were constructed in a similar fashion all participants gave varying results ranging from 0.97 to 12.63 times the true load measured in the field. One of the main reasons behind the varying results was due to the input parameters placed into the models. This paper addresses the effect on the simulations accuracy due to the constitutive behaviour chosen of the soil, and whether the simplification of the model from 3D space into 2D was reasonable. Conclusions from the research showed that the model was highly dependent on the correlations used to determine soil properties, the simulations geometry and the constitutive models that define elastic-plastic behaviour.
|Item Type:||Conference Item (Refereed Research Paper - E1)|
|Keywords:||ABAQUS; finite element method; modelling approach; shallow foundation; settlement|
|FoR Codes:||09 ENGINEERING > 0999 Other Engineering > 099999 Engineering not elsewhere classified @ 100%|
|SEO Codes:||87 CONSTRUCTION > 8702 Construction Design > 870201 Civil Construction Design @ 100%|
|Deposited On:||30 Jun 2010 10:42|
|Last Modified:||29 Jul 2013 00:50|
Last 12 Months: 0
|Citation Counts with External Providers:|
Repository Staff Only: item control page