Entrainment of a two-layer liquid through a taphole
Liow, Jong-Leng, Juusela, Mikko, Gray, N.B., and Sutalo, I.D. (2003) Entrainment of a two-layer liquid through a taphole. Metallurgical and Materials Transactions B, 34 (6). pp. 821-832.
|PDF (Published Version) - Repository staff only - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader|
View at Publisher Website: http://dx.doi.org/10.1007/s11663-003-008...
Entrainment through a taphole of a two-layer system has been investigated. The results showed that for liquids with low viscosities, the minimum dimensionless clearance from the taphole before entrainment occurs can be predicted theoretically and was related to the Froude number as Fr0.4. At low Froude numbers less than 1, fluids with low viscosities resulted in the entrainment showing a positive deviation from the critical Froude number. This allowed tapping to be carried out without entrainment occurring, even when the liquid-liquid interface was within the region of the taphole diameter. For liquids with appreciable viscosities, the entrainment showed a negative deviation from the critical Froude number. This occurs for the tapping of slag and results in entrainment at a higher liquid-liquid interface height than is predicted theoretically. Entrainment was more likely to happen for slag tapping than for matte tapping. A ledge below the taphole was found to reduce entrainment, enabling the liquid-liquid interface to be closer to the taphole during tapping. This resulted in improved slag removal efficiencies and reduced matte or metal entrainment, coupled with less slag left in the furnace after tapping. The length of the ledge from the taphole into the slag was found to be the controlling parameter for entrainment, while the ledge thickness had no effect on entrainment.
|Item Type:||Article (Refereed Research - C1)|
|Keywords:||entrainment; particle image velocimetry; taphole; two-layer liquid|
|FoR Codes:||09 ENGINEERING > 0914 Resources Engineering and Extractive Metallurgy > 091499 Resources Engineering and Extractive Metallurgy not elsewhere classified @ 100%|
|SEO Codes:||86 MANUFACTURING > 8611 Basic Metal Products (incl. Smelting, Rolling, Drawing and Extruding) > 861199 Basic Metal Products (incl. Smelting, Rolling, Drawing and Extruding) not elsewhere classified @ 100%|
|Deposited On:||04 Nov 2010 12:33|
|Last Modified:||18 Oct 2013 01:07|
Last 12 Months: 0
|Citation Counts with External Providers:|
Repository Staff Only: item control page